ZyXEL Communications LTE3301-PLUS, Руководство пользователя

Страница: 171 / 361

Chapter 9 Home Networking
Nebula Mobile Router User’s Guide
171
9.4 UPnP
Universal Plug and Play (UPnP) is an open networking standard that uses TCP/IP for simple peer-to-peer
network connectivity between networking devices or software applications which have UPnP enabled.
A UPnP device can dynamically join a network, obtain an IP address, advertise its services, and learn
about other devices on the network. A device can also leave a network automatically when it is no
longer in use.
See Section 9.7 on page 176 for more information on UPnP.
Note: To use UPnP NAT-T , enable NAT in the Network Setting > Broadband > Edit or Add New
WAN Interface screen.
Use the following screen to configure the UPnP settings on your Zyxel Device. Click Network Setting >
Home Networking > UPnP to display the screen shown next.
Figure 103 Network Setting > Home Networking > UPnP
IP Address Enter the IP address that you want to assign to the computer on your LAN with the MAC
address that you will also specify if you select
Manual Input in the previous field.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 59 Network Setting > Home Networking > Static DHCP: Static DHCP Configuration (continued)
LABEL DESCRIPTION