ZyXEL Communications IES-1248-51, Руководство пользователя

Страница: 319 / 385

IES-1248-51 User’s Guide
Chapter 49 ADSL Commands 319
The following example turns off the Annex I feature for port 5.
Figure 210 Annex I Disable Command Example
49.2 Statistics ADSL Commands
Use these commands to display ADSL port statistics.
49.2.1 ADSL Show Command
Syntax:
ras> statistics adsl show [portlist]
where
This command displays ADSL port connection statistics including the status (V for enabled, -
for disabled), ADSL operational mode, upstream and downstream maximum rates, up time
and the number of errored seconds.
The following example displays connection statistics for ADSL port 1.
49.2.2 Linedata Command
Syntax:
ras> statistics adsl linedata <portlist>
ras> adsl annexi disable 5
[portlist] =
You can specify a single ADSL port <1>, all ADSL ports <*>
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
Figure 211 ADSL Show Command Example
ras> statistics adsl show 1
port status mode up/downstream up time error second(15M/24H)
---- ------ -------- ------------- -------------- ---------------------
1 V adsl2 512/ 9089 00000:00:04:59 15/15