ZyXEL Communications GS2200 Series, Руководство пользователя

Страница: 43 / 320

Chapter 5 Initial Setup Example
GS2200 Series User’s Guide
43
In the example network, configure 2 as the port VID on port 1 so that any untagged frames
received on that port get sent to VLAN 2.
Figure 23
Initial Setup Network Example: Port VID
1
Click Advanced Applications >
VLAN in the navigation panel. Then
click the VLAN Port Setting link.
2
Enter 2 in the PVID field for port 1
and click Apply to save your changes
back to the run-time memory.
Settings in the run-time memory are
lost when the Switch’s power is turned
off.
5.2 Configuring Switch
Management IP Address
The default management IP address of the Switch is 192.168.1.1. You can configure another IP
address in a different subnet for management purposes. The following figure shows an example.
Figure 24
Initial Setup Example: Management IP Address