manualshive.com logo in svg

ZyXEL Communications GS2200-24P Series, Руководство пользователя, Страница: 243 / 360

Поделиться
Скачать
ZyXEL Communications GS2200-24P Series Скачать руководство пользователя страница 243

 Chapter 25 IP Source Guard

GS2200-24/24P User’s Guide

243

read. If the calculated checksum is not equal to the checksum in the file, that 
binding and all others after it are ignored.

25.10.1.3  DHCP Relay Option 82 Information

The Switch can add information to DHCP requests that it does not discard. This 
provides the DHCP server more information about the source of the requests. The 
Switch can add the following information:

• Slot ID (1 byte), port ID (1 byte), and source VLAN ID (2 bytes)
• System name (up to 32 bytes)

This information is stored in an Agent Information field in the option 82 field of the 
DHCP headers of client DHCP request frames. See 

Chapter 30 on page 265

 for 

more information about DHCP relay option 82.

When the DHCP server responds, the Switch removes the information in the Agent 
Information field before forwarding the response to the original source.

You can configure this setting for each source VLAN. This setting is independent of 
the DHCP relay settings (

Chapter 30 on page 265

).

25.10.1.4  Configuring DHCP Snooping

Follow these steps to configure DHCP snooping on the Switch.

1

Enable DHCP snooping on the Switch.

2

Enable DHCP snooping on each VLAN, and configure DHCP relay option 82.

3

Configure trusted and untrusted ports, and specify the maximum number of DHCP 
packets that each port can receive per second.

4

Configure static bindings.

Содержание GS2200-24P Series









































































































































































































































































































































































Отзывы:

Нет отзывов