ZyXEL Communications GS2200-24 Series, Руководство пользователя

Страница: 77 / 358

Chapter 8 Basic Setting
GS2200-24 User’s Guide
77
8.6 Switch Setup Screen
Click Basic Setting > Switch Setup in the navigation panel to display the screen
as shown. The VLAN setup screens change depending on whether you choose
802.1Q or Port Based in the VLAN Type field in this screen. Refer to Chapter 9
on page 87 for more information on VLAN.
Figure 37 Basic Setting > Switch Setup
The following table describes the labels in this screen.
Table 10 Basic Setting > Switch Setup
LABEL DESCRIPTION
VLAN Type Choose 802.1Q or Port Based . The VLAN Setup screen changes
depending on whether you choose 802.1Q VLAN type or Port Based
VLAN type in this screen. See Chapter 9 on page 87 for more
information.
GARP Timer: Switches join VLANs by making a declaration. A declaration is made by
issuing a
Join message using GARP. Declarations are withdrawn by issuing a Leave
message. A Leave All message terminates all registrations. GARP timers set declaration
timeout values. See the chapter on VLAN setup for more background information.
Join Timer
Join Timer sets the duration of the Join Period timer for GVRP in
milliseconds. Each port has a
Join Period timer. The allowed Join Time
range is between 100 and 65535 milliseconds; the default is 200
milliseconds. See the chapter on VLAN setup for more background
information.
Leave Timer Leave Time sets the duration of the Leave Period timer for GVRP in
milliseconds. Each port has a single Leave Period timer. Leave Time
must be two times larger than Join Timer ; the default is 600
milliseconds.