Chapter 4 Web Configurator
GS1915 Series User’s Guide
49
•
QoS
–
to determine a port’s IEEE 802.1p priority level for QoS.
4.4.1 Basic
In
Basic
, you can set up IP/DNS, set up your password, SNMP community, link aggregation, and view
finished results.
In order to set up your IP/DNS, please do the following. Click
Wizard
>
Basic
>
Step 1 IP
to access this
screen.
Figure 32
Wizard > Basic > Step 1 IP
Each field is described in the following table.
Table 10 Wizard > Basic > Step 1 IP
LABEL
DESCRIPTION
Host Name
This field displays a host name. Enter a string to set a new host name.
The host name should not contain [ ? ], [ | ], [ ' ], [ " ], or [ , ].
IP Interface
Select
DHCP Client
if the Switch is connected to a router with the DHCP server enabled. You
then need to check the router for the IP address assigned to the Switch in order to access
the Switch’s Web Configurator again.
Select
Static IP Address
when the Switch is NOT connected to a router or you want to assign
it a fixed IP address.
VID
This field displays the VLAN ID.
IP Address
The Switch needs an IP address for it to be managed over the network.
IP Subnet Mask
The subnet mask specifies the network number portion of an IP address.
Default Gateway
Type the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254.
Содержание GS1915 Series
