manualshive.com logo in svg

ZyXEL Communications GS-2724, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications GS-2724 Скачать руководство пользователя страница 195

 Chapter 29 Access Control

GS-2724 User’s Guide

195

29.3.1  Supported MIBs  

MIBs let administrators collect statistics and monitor status and performance.
The Switch supports the following MIBs:

• SNMP MIB II (RFC 1213)
• RFC 1157 SNMP v1
• RFC 1493 Bridge MIBs
• RFC 1643 Ethernet MIBs
• RFC 1155 SMI
• RFC 2674 SNMPv2, SNMPv2c
• RFC 1757 RMON
• SNMPv2, SNMPv2c or later version, compliant with RFC 2011 SNMPv2 MIB for IP, 

RFC 2012 SNMPv2 MIB for TCP, RFC 2013 SNMPv2 MIB for UDP

29.3.2  SNMP Traps  

The Switch sends traps to an SNMP manager when an event occurs. SNMP traps supported 
are outlined in the following table.

29.3.3  Configuring SNMP   

From the 

Access Control 

screen, display the 

SNMP 

screen. You can click 

Access Control 

to 

go back to the 

Access Control 

screen.

Table 69   

SNMP Traps

OBJECT LABEL

OBJECT ID

DESCRIPTION

SNMPv2 Traps

Cold Start

1.3.6.1.6.3.1.1.5.

1

This trap is sent when the Switch is turned on.

WarmStart

1.3.6.1.6.3.1.1.5.

2

This trap is sent when the Switch restarts.

linkDown

1.3.6.1.6.3.1.1.5.

3

This trap is sent when the Ethernet link is down.

linkUp

1.3.6.1.6.3.1.1.5.

4

This trap is sent when the Ethernet link is up.

authenticationFailure

1.3.6.1.6.3.1.1.5.

5

This trap is sent when an SNMP request comes from 

non-authenticated hosts.

RFC 1493 Traps

newRoot

1.3.6.1.2.1.17.0.1 This trap is sent when the STP topology changes.

topology change

1.3.6.1.2.1.17.0.2 This trap is sent when the STP root switch changes.

Содержание GS-2724





























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды