ZyXEL Communications G-570U, Руководство пользователя

Страница: 80 / 162

ZyXEL G-570U User’s Guide
80 Chapter 6 Wireless Screens
Figure 48 Wireless Security: WEP
The following table describes the labels in this screen.
6.14.3 Wireless Security: WPA(2)-PSK
Select WPA-PSK , WPA2-PSK or WPA-PSK & WPA2-PSK in the Encryption Method
drop down list-box to display the screen displays as next.
Table 18 Wireless Security: WEP
LABEL DESCRIPTION
Encryption Method Select WEP if you want to configure WEP encryption parameters.
Authentication
Type
Select Open or Shared from the drop-down list box.
Data Encryption Select 64 bit WEP or 128 bit WEP to enable data encryption.
Passphrase Enter a “passphrase” (password phrase) of up to 16 case-sensitive printable
characters and click Generate .
Generate After you enter the passphrase, click Generate to have the device generate four
different WEP keys automatically.
Key 1 to
Key 4 If you want to manually set the WEP keys, enter the WEP key in the field provided.
Select a WEP key to use for data encryption.
The WEP keys are used to encrypt data. Both the device and the wireless stations
must use the same WEP key for data transmission.
If you chose
64 bit WEP , then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose
128 bit WEP , then enter 13 ASCII characters or 26 hexadecimal
characters ("0-9", "A-F").
Apply Click Apply to save your changes back to the device.
Reset Click Reset to begin configuring this screen afresh.