![ZyXEL Communications G-2000 Plus V2 Скачать руководство пользователя страница 77](http://html1.mh-extra.com/html/zyxel-communications/g-2000-plus-v2/g-2000-plus-v2_user-manual_945995077.webp)
ZyXEL G-2000 Plus v2 User’s Guide
Chapter 5 LAN Screens
77
First DNS Server
Second DNS Server
Third DNS Server
Select
From ISP
if your ISP dynamically assigns DNS server information (and
the ZyXEL device's WAN IP address). The field to the right displays the (read-
only) DNS server IP address that the ISP assigns.
Select
User-Defined
if you have the IP address of a DNS server. Enter the DNS
server's IP address in the field to the right. If you chose
User-Defined
, but leave
the IP address set to 0.0.0.0,
User-Defined
changes to
None
after you click
Apply
. If you set a second choice to
User-Defined
, and enter the same IP
address, the second
User-Defined
changes to
None
after you click
Apply
.
Select
DNS Relay
to have the ZyXEL device act as a DNS proxy. The ZyXEL
device's LAN IP address displays in the field to the right (read-only). The ZyXEL
device tells the DHCP clients on the LAN that the ZyXEL device itself is the DNS
server. When a computer on the LAN sends a DNS query to the ZyXEL device,
the ZyXEL device forwards the query to the ZyXEL device's system DNS server
(configured in the
SYSTEM General
screen) and relays the response back to the
computer. You can only select
DNS Relay
for one of the three servers; if you
select DNS Relay for a second or third DNS server, that choice changes to
None
after you click
Apply
.
Select
None
if you do not want to configure DNS servers. If you do not configure
a DNS server, you must know the IP address of a computer in order to access it.
LAN TCP/IP
IP Address
Type the IP address of your ZyXEL device in dotted decimal notation 192.168.1.1
(factory default).
IP Subnet Mask
The subnet mask specifies the network number portion of an IP address. Your
ZyXEL device will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the ZyXEL device 255.255.255.0.
RIP Direction
RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a router to
exchange routing information with other routers. The
RIP Direction
field controls
the sending and receiving of RIP packets. Select the RIP direction from
Both
/
In
Only
/
Out Only
/
None
. When set to
Both
or
Out Only
, the ZyXEL device will
broadcast its routing table periodically. When set to
Both
or
In Only
, it will
incorporate the RIP information that it receives; when set to
None
, it will not send
any RIP packets and will ignore any RIP packets received.
Both
is the default.
RIP Version
The
RIP Version
field controls the format and the broadcasting method of the
RIP packets that the ZyXEL device sends (it recognizes both formats when
receiving).
RIP-1
is universally supported but RIP-2 carries more information.
RIP-1 is probably adequate for most networks, unless you have an unusual
network topology. Both
RIP-2B
and
RIP-2M
sends the routing data in RIP-2
format; the difference being that
RIP-2B
uses subnet broadcasting while
RIP-2M
uses multicasting. Multicasting can reduce the load on non-router machines since
they generally do not listen to the RIP multicast address and so will not receive
the RIP packets. However, if one router uses multicasting, then all routers on
your network must use multicasting, also. By default, RIP direction is set to
Both
and the Version set to
RIP-1
.
Multicast
Select
IGMP V-1
or
IGMP V-2
or
None
. IGMP (Internet Group Multicast Protocol)
is a network-layer protocol used to establish membership in a Multicast group - it
is not used to carry user data. IGMP version 2 (RFC 2236) is an improvement
over version 1 (RFC 1112) but IGMP version 1 is still in wide use. If you would
like to read more detailed information about interoperability between IGMP
version 2 and version 1, please see sections 4 and 5 of RFC 2236.
Windows Networking (NetBIOS over TCP/IP): NetBIOS (Network Basic Input/Output System) are TCP
or UDP broadcast packets that enable a computer to connect to and communicate with a LAN. For
some dial-up services such as PPPoE or PPTP, NetBIOS packets cause unwanted calls. However it
may sometimes be necessary to allow NetBIOS packets to pass through to the WAN in order to find a
computer on the WAN.
Table 19
LAN IP
LABEL
DESCRIPTION
Содержание G-2000 Plus V2
