ZyXEL Communications G-2000 Plus V2, Руководство пользователя

Страница: 284 / 440

ZyXEL G-2000 Plus v2 User’s Guide
284 Chapter 27 Network Address Translation (NAT)
27.4 Configuring a Server behind NAT
Follow these steps to configure a server behind NAT:
1
Enter 15 in the main menu to go to Menu 15 - NAT Setup.
2 Enter 2 to display Menu 15.2 - NAT Server Setup as shown next.
Table 105 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set
FIELD DESCRIPTION
Type Press [SPACE BAR] and then [ENTER] to select from a total of five types. These are
the mapping types discussed in the chapter on NAT web configurator screens. Server
allows you to specify multiple servers of different types behind NAT to this computer.
See section for an example.
Local IP Only local IP fields are N/A for server; Global IP fields MUST be set for Server .
Start This is the starting local IP address (ILA).
End This is the ending local IP address (ILA). If the rule is for all local IPs, then put the Start
IP as 0.0.0.0 and the End IP as 255.255.255.255. This field is N/A for One-to-One and
Server types.
Global IP
Start This is the starting inside global IP address (IGA). If you have a dynamic IP, enter
0.0.0.0 as the Global IP Start . Note that Global IP Start can be set to 0.0.0.0 only if
the types are Many-to-One or Server .
End This is the ending inside global IP address (IGA). This field is N/A for One-to-One ,
Many-to-One and Server types .
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.