ZyXEL Communications G-2000 Plus V2, Руководство пользователя

Страница: 265 / 440

ZyXEL G-2000 Plus v2 User’s Guide
Chapter 24 Remote Node Configuration 265
Table 96 Menu 11.1 Remote Node Profile for Ethernet Encapsulation
FIELD DESCRIPTION
Rem Node Name Enter a descriptive name for the remote node. This field can be up to eight
characters.
Active Press [SPACE BAR] and then [ENTER] to select Yes (activate remote node) or
No (deactivate remote node).
Encapsulation Ethernet is the default encapsulation. Press [SPACE BAR] and then [ENTER] to
change to PPPoE or PPTP encapsulation.
Service Type Press [SPACE BAR] and then [ENTER] to select from Standard , RR-Toshiba
(RoadRunner Toshiba authentication method), RR-Manager (RoadRunner
Manager authentication method), RR-Telstra or Telia Login . Choose one of the
RoadRunner methods if your ISP is Time Warner's RoadRunner; otherwise
choose Standard .
Outgoing
My Login This field is applicable for PPPoE encapsulation only. Enter the login name
assigned by your ISP when the ZyXEL device calls this remote node. Some ISPs
append this field to the Service Name field above (e.g., jim@poellc) to access the
PPPoE server.
My Password Enter the password assigned by your ISP when the ZyXEL device calls this
remote node. Valid for PPPoE encapsulation only.
Retype to Confirm Type your password again to make sure that you have entered it correctly.
Server This field is valid only when RoadRunner is selected in the Service Type field.
The ZyXEL device will find the RoadRunner Server IP automatically if this field is
left blank. If it does not, then you must enter the authentication server IP address
here.
Relogin Every
(min)
This field is available when you select Telia Login in the Service Type field.
The Telia server logs the ZyXEL device out if the ZyXEL device does not log in
periodically. Type the number of minutes from 1 to 59 (30 recommended) for the
ZyXEL device to wait between logins.
Route This field refers to the protocol that will be routed by your ZyXEL device – IP is the
only option for the ZyXEL device.
ISP Use [SPACE BAR] to select Yes to use your ISP.
Apply Alias The ZyXEL device supports three logical LAN interfaces via its single physical
Ethernet interface with the ZyXEL device itself as the gateway for each LAN
network. Press [SPACE BAR] to select IP Alias 1 or 2 and then press [ENTER].
Edit IP This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes and press
[ENTER] to go to Menu 11.3 - Remote Node Network Layer Options .
Session Options
Edit Filter Sets This field leads to another “hidden” menu. Use [SPACE BAR] to select Yes and
press [ENTER] to open menu 11.5 to edit the filter sets. See the Remote Node
Filter section for more details.
Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to
save your configuration, or press [ESC] at any time to cancel.