ZyXEL Communications G-2000 Plus V2, Руководство пользователя

Страница: 177 / 440

ZyXEL G-2000 Plus v2 User’s Guide
Chapter 13 Remote Management Screens 177
Figure 74 Security
The following table describes the labels in this screen.
Table 61 Security
LABEL DESCRIPTION
ICMP Internet Control Message Protocol is a message control and error-reporting
protocol between a host server and a gateway to the Internet. ICMP uses Internet
Protocol (IP) datagrams, but the messages are processed by the TCP/IP software
and directly apparent to the application user.
Respond to Ping
on
The ZyXEL device will not respond to any incoming Ping requests when Disable is
selected. Select LAN to reply to incoming LAN Ping requests . Select WAN to reply
to incoming WAN Ping requests. Otherwise select LAN & WAN to reply to both
incoming LAN and WAN Ping requests.
Do not respond to
requests for
unauthorized
services
Select this option to prevent hackers from finding the ZyXEL device by probing for
unused ports. If you select this option, the ZyXEL device will not respond to port
request(s) for unused ports, thus leaving the unused ports and the ZyXEL device
unseen. By default this option is not selected and the ZyXEL device will reply with
an ICMP Port Unreachable packet for a port probe on its unused UDP ports, and a
TCP Reset packet for a port probe on its unused TCP ports.
Note that the probing packets must first traverse the ZyXEL device's firewall
mechanism before reaching this anti-probing mechanism. Therefore if the firewall
mechanism blocks a probing packet, the ZyXEL device reacts based on the firewall
policy, which by default, is to send a TCP reset packet for a blocked TCP packet.
You can use the command "sys firewall tcprst rst [on|off]" to change this policy.
When the firewall mechanism blocks a UDP packet, it drops the packet without
sending a response packet.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.