Chapter 6 Diagnostic
FMG Series User’s Guide
37
6.3 Traceroute
Use this screen to trace the route that packets take for troubleshooting. After entering an IP address and
clicking
Go
to start a test, the results will show. Click
Diagnostic > Traceroute
to open the screen shown
next.
Figure 18
Diagnostic > Traceroute
The following table describes the fields in this screen.
Table 17 Diagnostic > Traceroute
LABEL
DESCRIPTION
Host Address
Type the IP address of a computer that you want to perform traceroute in order to test a
connection.
Trace Route
Click this to display the route path and transmission delays between the FMG to the IPv4 address
that you entered.
