ZyXEL Communications ES-2024 Series Скачать руководство пользователя страница 128

Страница: 128 / 282

Chapter 17 Link Aggregation

ES-2024 Series User’s Guide

128

• You must connect all ports point-to-point to the same Ethernet switch and configure the

ports for LACP trunking.

• LACP only works on full-duplex links.
• All ports in the same trunk group must have the same media type, speed, duplex mode and

flow control settings.

Configure trunk groups or LACP before you connect the Ethernet switch to avoid causing
network topology loops.

17.2.1 Link Aggregation ID

LACP aggregation ID consists of the following information

17.3 Link Aggregation Status

Click

Advanced Application

Link Aggregation

in the navigation panel. The

Link

Aggregation Status

screen displays by default. See

Section 17.1 on page 127

for more

information.

Figure 66

Advanced Application > Link Aggregation Status

The following table describes the labels in this screen.

Table 33

Link Aggregation ID: Local Switch

SYSTEM PRIORITY MAC ADDRESS

KEY

PORT PRIORITY

PORT NUMBER

0000

00-00-00-00-00

0000

Table 34

Link Aggregation ID: Peer Switch

SYSTEM PRIORITY MAC ADDRESS

KEY

PORT PRIORITY

PORT NUMBER

0000

00-00-00-00-00

0000

Port Priority and Port Number are 0 as it is the aggregator ID for the trunk group, not the individual port.

Table 35

Advanced Application > Link Aggregation Status

LABEL

DESCRIPTION

Group ID

This field displays the trunk ID to identify a trunk group, that is, one logical link

containing multiple ports.

Enabled Ports

These are the ports you have configured in the

Link Aggregation

screen to be in the

trunk group.

Synchronized

Ports

These are the ports that are currently transmitting data as one logical link in this trunk

group.

Содержание ES-2024 Series



























































































































































































































































































Результаты поиска

Содержание ES-2024 Series

Отзывы:

ZyXEL Communications ES-2024 Series, Руководство пользователя, Страница: 128 / 282

Результаты поиска

Содержание ES-2024 Series

Отзывы: