Chapter 7 Monitor
EMG6765-Q10A User’s Guide
56
7.4 DHCP Table
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain
TCP/IP configuration at start-up from a server. You can configure the EMG6765-Q10A’s LAN as a DHCP
server or disable it. When configured as a server, the EMG6765-Q10A provides the TCP/IP configuration
for the clients. If DHCP service is disabled, you must have another DHCP server on that network, or else
the computer must be manually configured.
Click
Monitor > DHCP Table
or
Configuration > Network > DHCP Server > Client List
. Read-only information
here relates to your DHCP status. The DHCP table shows current DHCP client information (including
MAC
Address
, and
IP Address
) of all network clients using the EMG6765-Q10A’s DHCP server.
Figure 20
Monitor > DHCP Table
The following table describes the labels in this screen.
7.5 Packet Statistics
Click
Monitor > Packet Statistics
or the
Packet Statistics (Details...)
hyperlink in the
Status
screen. Read-
only information here includes port status, packet specific statistics and the "system up time". The
Poll
Interval(s)
field is configurable and is used for refreshing the screen.
Table 11 Monitor > DHCP Table
LABEL
DESCRIPTION
#
This is the index number of the host computer.
Status
This field displays whether the connection to the host computer is up (a yellow bulb) or down (a
gray bulb).
Host Name
This field displays the computer host name.
IP Address
This field displays the IP address relative to the # field listed above.
MAC Address
This field shows the MAC address of the computer with the name in the
Host Name
field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Interface
This field identifies the interface that assigned an IP address to a DHCP client.
Reserve
Select this if you want to reserve the IP address for this specific MAC address.
Apply
Click
Apply
to save your changes back to the EMG6765-Q10A.
Cancel
Click
Cancel
to reload the previous configuration for this screen.
Содержание EMG6765-Q10A
Страница 11: ...11 PART I User s Guide...
Страница 53: ...53 PART II Technical Reference...
Страница 71: ...Chapter 8 WAN EMG6765 Q10A User s Guide 71 Figure 29 Add Edit WAN Connection Advanced...
