Chapter 25 Maintenance
EMG6765-Q10A User’s Guide
177
25.6 Firmware Upgrade Screen
Find firmware at
www.zyxel.com
in a file that (usually) uses the system model name with a “*.bin”
extension, e.g., “EMG6765-Q10A.bin”. The upload process uses HTTP (Hypertext Transfer Protocol) and
may take up to two minutes. After a successful upload, the system will reboot.
Click
Maintenance > Firmware Upgrade
. Follow the instructions in this screen to upload firmware to your
EMG6765-Q10A.
First / Second
User Defined
Time Server
Address
Enter the IP address or URL (up to 20 extended ASCII characters in length) of your time server.
Check with your ISP/network administrator if you are unsure of this information.
Time Zone Setup
Time Zone
Choose the time zone of your location. This will set the time difference between your time zone
and Greenwich Mean Time (GMT).
Daylight Saving
Daylight saving is a period from late spring to early fall when many countries set their clocks
ahead of normal local time by one hour to give more daytime light in the evening.
Select this option if you use Daylight Saving Time.
Start Date
Configure the day and time when Daylight Saving Time starts if you selected
Daylight Savings
.
The
o’clock
field uses the 24 hour format. Here are a couple of examples.
Daylight Saving Time starts in most parts of the United States on the first Sunday of April. Each
time zone in the United States starts using Daylight Saving Time at 2 A.M local time. So in the
United States you would select
First
,
Sunday
,
April
and type 2 in the
o’clock
field.
Daylight Saving Time starts in the European Union on the last Sunday of March. All of the time
zones in the European Union start using Daylight Saving Time at the same moment (1 A.m. GMT
or UTC). So in the European Union you would select
Last
,
Sunday
,
March
. The time you type in the
o’clock
field depends on your time zone. In Germany for instance, you would type 2 because
Germany’s time zone is one hour ahead of GMT or UTC (GMT+1).
End Date
Configure the day and time when Daylight Saving Time ends if you selected
Daylight Savings
.
The
o’clock
field uses the 24 hour format. Here are a couple of examples.
Daylight Saving Time ends in the United States on the last Sunday of October. Each time zone in
the United States stops using Daylight Saving Time at 2 A.M. local time. So in the United States
you would select
Last, Sunday, October
and type 2 in the
o’clock
field.
Daylight Saving Time ends in the European Union on the last Sunday of October. All of the time
zones in the European Union stop using Daylight Saving Time at the same moment (1 A.M. GMT
or UTC). So in the European Union you would select
Last, Sunday, October
. The time you type in
the
o’clock
field depends on your time zone. In Germany for instance, you would type 2
because Germany’s time zone is one hour ahead of GMT or UTC (GMT + 1).
Apply
Click
Apply
to save your changes back to the EMG6765-Q10A.
Cancel
Click
Cancel
to exit this screen without saving.
Table 77 Maintenance > Time (continued)
LABEL
DESCRIPTION
Содержание EMG6765-Q10A
Страница 11: ...11 PART I User s Guide...
Страница 53: ...53 PART II Technical Reference...
Страница 71: ...Chapter 8 WAN EMG6765 Q10A User s Guide 71 Figure 29 Add Edit WAN Connection Advanced...