ZyXEL Communications EMG6726-B10A, Руководство пользователя, Страница: 51 / 323

Chapter 4 Tutorials
EMG6726/8726-B10A User’s Guide
51
4.5 Configuring Static Route for Routing to Another
Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to the
EMG’s LAN. The router may be used to separate two department networks. This tutorial shows how to
configure a static routing rule for two network routings.
In the following figure, router R is connected to the EMG’s LAN. R connects to two networks, N1
(192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from computer A (in N1 network) to
computer B (in N2 network), the traffic is sent to the EMG’s WAN default gateway by default. In this
case, B will never receive the traffic.
You need to specify a static routing rule on the EMG to specify R as the router in charge of forwarding
traffic to N2 . In this case, the EMG routes traffic from A to R and then R routes the traffic to B .