ZyXEL Communications EMG3425-Q10A, Руководство пользователя

Страница: 76 / 250

Chapter 9 Wireless LAN
EMG3425-Q10A User’s Guide
76
The following table describes the labels in this screen.
9.3.2 WPA-PSK/WPA2-PSK
Select WPA-PSK or WPA2-PSK from the Security Mode list.
Figure 35
Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Table 20
Network > Wireless LAN 2.4G/5G > General: No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.
Apply Click Apply to save your changes back to the EMG3425-Q10A.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 21
Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION
Security Mode Select WPA-PSK or WPA2-PSK to enable data encryption.
WPA-PSK
Compatible This field appears when you choose WPA2-PSK as the Security Mode .
Check this field to allow wireless devices using WPA-PSK security mode to connect to
your EMG3425-Q10A.
Pre-Shared Key WPA-PSK/WPA2-PSK uses a simple common password for authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Group Key Update
Timer The Group Key Update Timer is the rate at which the AP sends a new group key out to
all clients.
The default is 3600 seconds (60 minutes).