ZyXEL Communications EMG3425-Q10A, Руководство пользователя

Страница: 191 / 250

Chapter 26 Troubleshooting
EMG3425-Q10A User’s Guide
191
• Check the settings for QoS. If it is disabled, you might consider activating it.
26.5 Resetting the EMG3425-Q10A to Its Factory Defaults
If you reset the EMG3425-Q10A, you lose all of the changes you have made. The EMG3425-Q10A
re-loads its default settings, and the password resets to
1234 . You have to make all of your
changes again.
You will lose all of your changes when you push the RESET button.
To reset the EMG3425-Q10A:
1
Make sure the power LED is on.
2
Press the RESET button for one to four seconds to restart/reboot the EMG3425-Q10A.
3
Press the RESET button for longer than five seconds to set the EMG3425-Q10A back to its factory-
default configurations.
If the EMG3425-Q10A restarts automatically, wait for the EMG3425-Q10A to finish restarting, and
log in to the Web Configurator. The password is “1234”.
If the EMG3425-Q10A does not restart automatically,
di
sconnect and reconnect the EMG3425-
Q10A’s power. Then, follow the directions above again.
26.6 Wireless Connections
I cannot access the EMG3425-Q10A or ping any computer from the WLAN.
1
Make sure the wireless LAN is enabled on the EMG3425-Q10A.
2
Make sure the wireless adapter on your computer is working properly.
3
Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports
the same wireless standard as the EMG3425-Q10A.
4
Make sure your computer (with a wireless adapter installed) is within the transmission range of the
EMG3425-Q10A.
5
Check that both the EMG3425-Q10A and the wireless adapter on your computer are using the same
wireless and wireless security settings.