manualshive.com logo in svg

ZyXEL Communications Dimension ES-4124, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications Dimension ES-4124 Скачать руководство пользователя страница 4

ES-4124 User’s Guide

2

Certifications

Certifications

Federal Communications Commission (FCC) Interference Statement

This device complies with Part 15 of FCC rules. Operation is subject to the following two 
conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause 

undesired operations.

FCC Warning

This device has been tested and found to comply with the limits for a Class A digital switch, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a commercial environment. This device generates, 
uses, and can radiate radio frequency energy and, if not installed and used in accordance with 
the instruction manual, may cause harmful interference to radio communications. Operation of 
this device in a residential area is likely to cause harmful interference in which case the user 
will be required to correct the interference at his own expense.

CE Mark Warning:

This is a class A product. In a domestic environment this product may cause radio interference 
in which case the user may be required to take adequate measures.

Taiwanese BSMI (Bureau of Standards, Metrology and Inspection) A 
Warning: 

Notices 

Changes or modifications not expressly approved by the party responsible for compliance 
could void the user's authority to operate the equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Viewing Certifications

1

Go to 

http://www.zyxel.com

.

Содержание Dimension ES-4124





















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды