ZyXEL Communications Dimension ES-4124, Руководство пользователя

Страница: 268 / 372

ES-4124 User’s Guide
266 Chapter 42 Introducing Commands
• Use the same configuration file to set all switches (of the same model) in your network to
the same settings.
Note: You may also edit a configuration file using a text editor.
Make sure you use valid commands. The switch rejects configuration files with
invalid or incomplete commands.
42.10.2 Logging Out
In User or Enable mode, enter the
exit
or
logout
command to log out of the CLI. In Config
mode entering
exit
takes you out of the Config mode and into Enable mode and entering
logout
logs you out of the CLI.
42.11 Command Summary
The following sections summarize the commands available in the switch together with a brief
description of each command. Commands listed in the tables are in the same order as they are
displayed in the CLI. See the related section in the User’s Guide for more background
information.
42.11.1 User Mode
The following table describes the commands available for User mode.
Table 105 Command Summary: User Mode
COMMAND DESCRIPTION PRIVILEGE
help
Displays help information. 0
logout Exits from the CLI. 0
exit
Logs out from the CLI. 0
history Displays a list of previously command(s) that you
have executed. The switch stores up to 256
commands in history.
0
enable Accesses Enable (or privileged) mode. See Section
42.11.2 on page 267 .
0
show ip Displays IP related information. 0
hardware-monitor
<C|F>
Displays current hardware monitor information with
the specified temperature unit (Celsius C or
Fahrenheit F).
0
system-information
Displays general system information. 0
ping <IP|host-name> Sends Ping request to an Ethernet device. 0