ZyXEL Communications ATP200 Скачать руководство пользователя страница 585

Страница: 585 / 852

Chapter 34 Object

ZyWALL ATP Series User’s Guide

585

34.2.2.1 User Add/Edit Screen

The

User Add/Edit

screen allows you to create a new user account or edit an existing one.

34.2.2.2 Rules for User Names

Enter a user name from 1 to 31 characters.

The user name can only contain the following characters:

• Alphanumeric A-z 0-9 (there is no unicode support)
• _ [underscores]
• - [dashes]

The first character must be alphabetical (A-Z a-z), an underscore (_), or a dash (-). Other limitations on
user names are:

• User names are case-sensitive. If you enter a user 'bob' but use 'BOB' when connecting via CIFS or FTP,

it will use the account settings used for 'BOB' not ‘bob’.

• User names have to be different than user group names.
• Here are the reserved user names:

Remove

To remove an entry, select it and click

Remove

. The Zyxel Device confirms you want to remove

it before doing so.

References

Select an entry and click

References

to open a screen that shows which settings use the entry.

This field is a sequential value, and it is not associated with a specific user.

User Name

This field displays the user name of each user.

User Type

This field displays the types of user accounts the Zyxel Device uses:

•

admin

- this user can look at and change the configuration of the Zyxel Device

•

limited-admin

- this user can look at the configuration of the Zyxel Device but not to

change it

•

dynamic-guest

- this user has access to the Zyxel Device’s services but cannot look at the

configuration.

•

user

- this user has access to the Zyxel Device’s services and can also browse user-mode

commands (CLI).

•

guest

- this user has access to the

Zyxel Device

’s services but cannot look at the

configuration

•

ext-user

- this user account is maintained in a remote server, such as RADIUS or LDAP. See

Ext-User Accounts on page 583

for more information about this type.

•

ext-group-user

- this user account is maintained in a remote server, such as RADIUS or

LDAP. See

Ext-Group-User Accounts on page 583

for more information about this type.

•

guest-manager

- this user can log in via the web configurator login screen and create

dynamic guest accounts using the

Account Generator

screen that pops up.

Description

This field displays the description for each user.

Reference

This displays the number of times an object reference is used in a profile.

Table 235 Configuration > Object > User/Group > User (continued)

LABEL

DESCRIPTION

• adm

• admin

• any

• bin

• daemon

• debug

• devicehaecived • ftp

• games

• halt

• ldap-users

• lp

• mail

• news

• nobody

• operator

• radius-users

• root

• shutdown

• sshd

• sync

• uucp

• zyxel

Содержание ATP200





















































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ATP200

Отзывы:

Похожие инструкции для ATP200

Бренды по названию

Популярные бренды

ZyXEL Communications ATP200, Руководство пользователя

Результаты поиска

Содержание ATP200

Отзывы:

Похожие инструкции для ATP200

Бренды по названию

Популярные бренды