manualshive.com logo in svg

ZyXEL Communications ATP200, Руководство пользователя, Страница: 293 / 852

Поделиться
Скачать
ZyXEL Communications ATP200 Скачать руководство пользователя страница 293

 Chapter 9 Interfaces

ZyWALL ATP Series User’s Guide

293

9.11.2  Configuring the System Default Trunk 

In the 

Configuration > Network > Interface > Trunk

 screen and the 

System Default

 section, select the 

default trunk entry and click 

Edit

 to open the 

following

 screen. Use this screen to change the load 

balancing algorithm and view the bandwidth allocations for each member interface.

Note: The available bandwidth is allocated to each member interface equally and is not 

allowed to be changed for the default trunk. 

Member

Click this table cell and select an interface to be a group member. 

If you select an interface that is part of another Ethernet interface, the Zyxel Device does 
not send traffic through the interface as part of the trunk. For example, if you have physical 
port 5 in the ge2 representative interface, you must select interface ge2 in order to send 
traffic through port 5 as part of the trunk. If you select interface ge5 as a member here, the 
Zyxel Device will not send traffic through port 5 as part of the trunk.

Mode

Click this table cell and select 

Active 

to have the Zyxel Device always attempt to use this 

connection.

Select 

Passive 

to have the Zyxel Device only use this connection when all of the 

connections set to active are down. You can only set one of a group’s interfaces to passive 
mode.

Weight

This field displays with the weighted round robin load balancing algorithm. Specify the 
weight (1~10) for the interface. The weights of the different member interfaces form a ratio. 
This ratio determines how much traffic the Zyxel Device assigns to each member interface. 
The higher an interface’s weight is (relative to the weights of the interfaces), the more 
sessions that interface should handle.

Ingress Bandwidth

This is reserved for future use.

This field displays with the least load first load balancing algorithm. It displays the maximum 
number of kilobits of data the Zyxel Device is to allow to come in through the interface per 
second. 

Note: You can configure the bandwidth of an interface in the corresponding 

interface edit screen.

Egress Bandwidth

This field displays with the least load first or spillover load balancing algorithm. It displays the 
maximum number of kilobits of data the Zyxel Device is to send out through the interface 
per second.

Note: You can configure the bandwidth of an interface in the corresponding 

interface edit screen.

Spillover

This field displays with the spillover load balancing algorithm. Specify the maximum 
bandwidth of traffic in kilobits per second (1~1048576) to send out through the interface 
before using another interface. When this spillover bandwidth limit is exceeded, the Zyxel 
Device sends new session traffic through the next interface. The traffic of existing sessions 
still goes through the interface on which they started.

The Zyxel Device uses the group member interfaces in the order that they are listed. 

OK

Click 

OK

 to save your changes back to the Zyxel Device.

Cancel

Click

 Cancel

 to exit this screen without saving.

Table 115   Configuration > Network > Interface > Trunk > Add (or Edit) (continued)

LABEL

DESCRIPTION

Содержание ATP200





















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов