manualshive.com logo in svg

ZyXEL Communications ATP200, Руководство пользователя, Страница: 291 / 852

Поделиться
Скачать
ZyXEL Communications ATP200 Скачать руководство пользователя страница 291

 Chapter 9 Interfaces

ZyWALL ATP Series User’s Guide

291

The following table describes the items in this screen. 

9.11.1  Configuring a User-Defined Trunk

Click 

Configuration > Network > Interface > Trunk

, in the 

User Configuration

 table click the 

Add

 (or 

Edit

) 

icon to open the 

following

 screen. Use this screen to create or edit a WAN trunk entry.

Table 114   Configuration > Network > Interface > Trunk

LABEL

DESCRIPTION

Show Advanced 
Settings / Hide 
Advanced Settings

Click this button to display a greater or lesser number of configuration fields.

Configuration

Configure what to do with existing passive mode interface connections when an 
interface set to active mode in the same trunk comes back up.

Disconnect 

Connections Before 

Falling Back

Select this to terminate existing connections on an interface which is set to passive mode 
when any interface set to active mode in the same trunk comes back up.

Enable Default SNAT

Select this to have the Zyxel Device use the IP address of the outgoing interface as the 
source IP address of the packets it sends out through its WAN trunks. The Zyxel Device 
automatically adds SNAT settings for traffic it routes from internal interfaces to external 
interfaces.

Default Trunk Selection

Select whether the Zyxel Device is to use the default system WAN trunk or one of the user 
configured WAN trunks as the default trunk for routing traffic from internal interfaces to 
external interfaces.

User Configuration / 
System Default

The Zyxel Device automatically adds all external interfaces into the pre-configured 
system default 

SYSTEM_DEFAULT_WAN_TRUNK

. You cannot delete it. You can create your 

own 

User Configuration

 trunks and customize the algorithm, member interfaces and the 

active/passive mode.

Add

Click this to create a new user-configured trunk.

Edit

Double-click an entry or select it and click 

Edit 

to open a screen where you can modify 

the entry’s settings. 

Remove

To remove a user-configured trunk, select it and click 

Remove

. The Zyxel Device confirms 

you want to remove it before doing so.

References

Select an entry and click 

References

 to open a screen that shows which settings use the 

entry. See 

Section 9.3.4 on page 230

 for an example.

#

This field is a sequential value, and it is not associated with any interface.

Name

This field displays the label that you specified to identify the trunk.

Algorithm

This field displays the load balancing method the trunk is set to use. 

Apply

Click this button to save your changes to the Zyxel Device. 

Reset

Click this button to return the screen to its last-saved settings. 

Содержание ATP200





















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов