ZyXEL Communications APS 1.0, Руководство администратора

Страница: 25 / 116

Auto Provisioning Administrator’s Guide
Chapter 3 Provisioning Utility 25
3.5 Getting an SPTGEN File
You can use an internal SPTGEN file to create a common file. Use the following procedure to
get a SPTGEN file from a VoIP device via FTP.
1 Launch the FTP client on your computer.
2 Enter “open”, followed by a space and the IP address of your VoIP device.
3 Press [ENTER] when prompted for a username.
4 Enter your password as requested (the default is “1234”).
5 Enter “bin” to set transfer mode to binary.
6 Use “get” to transfer files from the device to the computer, for example, “get rom-t
SPTGEN.txt” transfers the internal SPTGEN file on the device to your computer and
renames it “SPTGEN.txt”.
7 Enter “quit” to exit the ftp prompt.
The following figure shows an example.
Figure 7 FTP Session Example
3.6 Auto Provisioning Text Files
Auto provisioning uses configuration text files that include subscriber specific SIP settings
(username, password and SIP number). Subscribers do not need to configure any SIP settings.
They only need to connect the VoIP device to the Internet.
C:\>ftp 192.168.1.1
Connected to 192.168.1.1.
220 P2302R FTP version 1.0 ready at Sat Jan 01
00:01:52 2000
User (192.168.1.1:(none)):
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-t P-2302R.txt
200 Port command okay
150 Opening data connection for RETR rom-t
226 File sent OK
ftp: 36107 bytes received in 3.75Seconds
9.63Kbytes/sec.
ftp> quit
221 Goodbye!