ZyXEL Communications AMG1302-T11C, Руководство пользователя

Страница: 96 / 307

Chapter 7 Wireless LAN
AMG1302-T11C User’s Guide
96
7.4 The MAC Authentication Screen
This screen allows you to configure the AMG1302-T11C to give exclusive access to specific devices
(Allow) or exclude specific devices from accessing the AMG1302-T11C (Deny) . Every Ethernet
device has a unique MAC (Media Access Control) address. The MAC address is assigned at the
factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You
need to know the MAC addresses of the devices to configure this screen.
Wireless Network Name
(SSID) The SSID (Service Set IDentity) identifies the service set with which a wireless
device is associated. Wireless devices associating to the access point (AP) must
have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless
LAN.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
Guest WLAN Select this to create Guest WLANs for home and external clients. Select the WLAN
type in the
Access Scenario field.
Access Scenario If you select Home Guest , clients connecting to the same SSID can communicate
with each other directly.
If you select External Guest , clients are blocked from connecting to each other
directly.
Max. Upstream
Bandwidth Specify the maximum rate for upstream wireless traffic to the WAN from this WLAN
in kilobits per second (Kbps).
Max. Downstream
Bandwidth Specify the maximum rate for downstream wireless traffic to this WLAN from the
WAN in kilobits per second (Kbps).
Security Level
Security Mode Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on
this wireless network. The wireless clients which want to associate to this network
must have same wireless security settings as the AMG1302-T11C. After you select
to use a security, additional options appears in this screen.
Or you can select No Security to allow any client to associate this network without
any data encryption or authentication.
See Section 7.2.1 on page 90 for more details about this field.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 21
Network Setting > Wireless > More/guest AP: Edit
LABEL DESCRIPTION