ZyXEL Communications AMG1302-T11C, Руководство пользователя, Страница: 170 / 307

Chapter 15 Firewall
AMG1302-T11C User’s Guide
170
15.4.1 The Rules Add Screen
Use this screen to configure firewall rules. In the Rules screen, select an index number and click
Add or click a rule’s Edit icon to display this screen and refer to the following table for information
on the labels.
Source Interface This column displays the source interface to which this firewall rule applies. This is the
interface through which the traffic entered the AMG1302-T11C. Please note that a blank
source interface is equivalent to
Any .
Destination
Interface This column displays the destination interface to which this firewall rule applies. This is
the interface through which the traffic is destined to leave the AMG1302-T11C. Please
note that a blank source interface is equivalent to
Any .
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to remove an existing firewall rule. A window displays asking you
to confirm that you want to delete the firewall rule. Note that subsequent firewall rules
move up by one when you take this action.
Order To change a rule’s position in the numbered list, click the icon to display the Move the
rule to field to type a number for where you want to put the rule and click the Move
button to move the rule to the number that you typed.
The ordering of your rules is important as they are applied in order of their numbering.
Table 63
Security > Firewall > Rules
LABEL DESCRIPTION