ZyXEL Communications AMG1302-T11C, Руководство пользователя

Страница: 145 / 307

Chapter 10 Quality of Service (QoS)
AMG1302-T11C User’s Guide
145
10.5 The QoS Game List Screen
Use this screen to give priority to traffic for specific games. Click Network Setting > QoS > Game
List to open the screen as shown next.
Figure 67
Network Setting > QoS > Game List
Type Of
Service Mark
Select a type of service to re-assign the priority level to matched traffic.
Available options are: Normal service , Minimize delay , Maximize throughput ,
Maximize reliability and Minimize monetary cost .
DSCP
Mark(0~63)
This field is available only when you select IP in the Ether Type field.
If you select Mark , enter a DSCP value with which the AMG1302-T11C replaces the DSCP
field in the packets.
If you select Unchange , the AMG1302-T11C keep the DSCP field in the packets.
802.1Q Tag If you select Remark , select a priority level (in the Ethernet Priority field) and enter a
VLAN ID number (in the VLAN ID field) with which the AMG1302-T11C replaces the IEEE
802.1p priority field and VLAN ID of the frames.
If you select Remove , the AMG1302-T11C deletes the VLAN ID of the frames before
forwarding them out.
If you select Add , the AMG1302-T11C treat all matched traffic untagged and add a
second priority level and VLAN ID that you specify in the Ethernet Priority and VLAN
ID fields.
If you select Same , the AMG1302-T11C keep the Ethernet Priority and VLAN ID in the
packets.
To configure the Ethernet Priority, you can either select a priority number in the first
drop-down list box (7 is the highest and 0 is the lowest priority) or select an application
from the second drop-down list box which automatically maps to the corresponding
priority number. (Key Net Traffic: 7; Voice: 6; Video: 5;IGMP: 4; Key Data: 3)
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 46
QoS > Class Setup Add/Edit (continued)
LABEL DESCRIPTION