ZyXEL Communications AMG1302-T10A Скачать руководство пользователя страница 295

Страница: 295 / 332

AMG1302-T10A User’s Guide

295

P P E N D I X

Legal Information

Copyright

The contents of this publication may be reproduced in any part or as a whole, transcribed, stored in

a retrieval system, translated into any language, or transmitted in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without

the prior written permission of ZyXEL Communications Corporation.

Disclaimer

ZyXEL does assume any liability arising out of the application or use of any products, or software

described herein. Neither does it convey any license under its patent rights nor the patent rights of

others. ZyXEL further reserves the right to make changes in any products described herein without

ice. This publication is subject to change without ice.

Trademarks

ZyNOS (ZyXEL Network Operating System) is a registered trademark of ZyXEL Communications,

Inc. Other trademarks mentioned in this publication are used for identification purposes only and

may be properties of their respective owners.

Certifications

Federal Communications Commission (FCC) Interference Statement

The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:

• This device may cause harmful interference.
• This device must accept any interference received, including interference that may cause

undesired operations.

This device has been tested and found to comply with the limits for a Class B digital device pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This device generates, uses, and can radiate radio

frequency energy, and if installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will occur

in a particular installation.

Содержание AMG1302-T10A













































































































































































































































































































































Результаты поиска

Содержание AMG1302-T10A

Отзывы:

Похожие инструкции для AMG1302-T10A

Бренды по названию

Популярные бренды

ZyXEL Communications AMG1302-T10A, Руководство пользователя

Результаты поиска

Содержание AMG1302-T10A

Отзывы:

Похожие инструкции для AMG1302-T10A

Бренды по названию

Популярные бренды