ZyXEL Communications AMG1202-T10A, Руководство пользователя

Страница: 133 / 296

Chapter 9 Network Address Translation (NAT)
AMG1202-T10A User’s Guide
133
To change your ZyXEL Device’s address mapping settings, click Network > NAT > Address
Mapping to open the following screen.
Figure 68
Network > NAT > Address Mapping
The following table describes the fields in this screen.
Table 44
Network > NAT > Address Mapping
LABEL DESCRIPTION
# This is the rule index number.
Local Start IP This is the starting Inside Local IP Address (ILA). Local IP addresses are N/A for
Server port mapping.
Local End IP This is the end Inside Local IP Address (ILA). If the rule is for all local IP addresses,
then this field displays 0.0.0.0 as the
Local Start IP address and
255.255.255.255 as the Local End IP address. This field is N/A for One-to-one
and Server mapping types.
Global Start IP This is the starting Inside Global IP Address (IGA). Enter 0.0.0.0 here if you have a
dynamic IP address from your ISP. You can only do this for
Many-to-One and
Server mapping types.
Global End IP This is the ending Inside Global IP Address (IGA). This field is N/A for One-to-
one , Many-to-One and Server mapping types.
Type 1-1 : One-to-one mode maps one local IP address to one global IP address. Note
that port numbers do not change for the One-to-one NAT mapping type.
M-1 : Many-to-One mode maps multiple local IP addresses to one global IP
address. This is equivalent to SUA (i.e., PAT, port address translation), ZyXEL's
Single User Account feature that previous ZyXEL routers supported only.
M-M Ov (Overload): Many-to-Many Overload mode maps multiple local IP
addresses to shared global IP addresses.
MM No (No Overload): Many-to-Many No Overload mode maps each local IP
address to unique global IP addresses.
Server : This type allows you to specify inside servers of different services behind
the NAT to be accessible to the outside world.
Modify Click the edit icon to go to the screen where you can edit the address mapping
rule.
Click the delete icon to delete an existing address mapping rule. Note that
subsequent address mapping rules move up by one when you take this action.