ZyXEL Communications AMG1202-T10A, Руководство пользователя

Страница: 103 / 296

Chapter 8 Wireless LAN
AMG1202-T10A User’s Guide
103
8.2.4 WPA(2) Authentication
Use this screen to configure and enable WPA or WPA2 authentication. Click the Wireless LAN link
under Network to display the AP screen. Select WPA , WPA2 or WPAMixed from the Security
Mode list.
Figure 47
Network > Wireless LAN > AP: WPA(2)
The following table describes the wireless LAN security labels in this screen.
Table 30
Network > Wireless LAN > AP: WPA(2)
LABEL DESCRIPTION
Security Mode Choose WPA or WPA2 from the drop-down list box.
Encryption Select the encryption type ( TKIP , AES or TKIP/AES ) for data encryption.
Select TKIP if your wireless clients can all use TKIP.
Select AES if your wireless clients can all use AES.
Select TKIP/AES to allow the wireless clients to use either TKIP or AES.
WPA Compatible This check box is available only when you select WPA2-PSK or WPA2 in the
Security Mode field.
Select the check box to have both WPA-PSK and WPA wireless clients be able to
communicate with the ZyXEL Device even when the ZyXEL Device is using
WPA2-PSK or WPA2.
ReAuthentication
Timer Specify how often wireless stations have to resend usernames and passwords
in order to stay connected. Enter a time interval between 10 and 9999 seconds.
Note: If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
Idle Timeout The ZyXEL Device automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the
username and password again before access to the wired network is allowed.