ZyXEL Communications AMG1202-T series Скачать руководство пользователя страница 230 | Manualshive

Страница: 230 / 320

ZyXEL Communications AMG1202-T series Скачать руководство пользователя страница 230

Chapter 25 Remote Management

AMG1302/AMG1202-TSeries User’s Guide

230

25.6 The DNS Screen

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice
versa.

Use this screen to set from which IP address the AMG1302/AMG1202-TSeries will accept DNS
queries and on which interface it can send them your AMG1302/AMG1202-TSeries’s DNS settings.
This feature is not available when the AMG1302/AMG1202-TSeries is set to bridge mode. Click

Maintenance > RemoteMGMT

>

DNS

to change your AMG1302/AMG1202-TSeries’s DNS

settings.

Figure 122

Maintenance > RemoteMGMT > DNS

The following table describes the labels in this screen.

25.7 The ICMP Screen

To change your AMG1302/AMG1202-TSeries’s security settings, click

Maintenance >

RemoteMGMT

>

ICMP

. The screen appears as shown.

If an outside user attempts to probe an unsupported port on your AMG1302/AMG1202-TSeries, an
ICMP response packet is automatically returned. This allows the outside user to know the

Table 89

Maintenance > RemoteMGMT > DNS

LABEL

DESCRIPTION

Server Port

This displays the service port number for accessing the AMG1302/AMG1202-
TSeries. If the number is grayed out, it is not editable.

Access Status

Select the interface(s) through which a computer may send DNS queries to the
AMG1302/AMG1202-TSeries.

Secured Client IP
Address

A secured client is a “trusted” computer that is allowed to send DNS queries to
the AMG1302/AMG1202-TSeries.

Select

All

to allow any computer to send DNS queries to the AMG1302/AMG1202-

TSeries.

Choose

Range

to just allow the computer(s) with an IP address in the range that

you specify to send DNS queries to the AMG1302/AMG1202-TSeries.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

«
...
228
229
230
231
232
...
»

Содержание AMG1202-T series

































































































































































































































































































































Отзывы:

Нет отзывов