manualshive.com logo in svg

ZyXEL Communications AMG1202-T series, Руководство пользователя, Страница: 187 / 320

Поделиться
Скачать
ZyXEL Communications AMG1202-T series Скачать руководство пользователя страница 187

 Chapter 15 Firewall

AMG1302/AMG1202-TSeries User’s Guide

187

• LAN  to  WAN

These rules specify which computers on the LAN can access which computers or services on the 
WAN.

By default, the AMG1302/AMG1202-TSeries’s stateful packet inspection drops packets traveling in 
the following directions:

• WAN  to  LAN

These rules specify which computers on the WAN can access which computers or services on the 
LAN. 

Note: You also need to configure NAT port forwarding (or full featured NAT address 

mapping rules) to allow computers on the WAN to access devices on the LAN.

• WAN  to  Router

By default the AMG1302/AMG1202-TSeries stops computers on the WAN from managing the 
AMG1302/AMG1202-TSeries. You could configure one of these rules to allow a WAN computer to 
manage the AMG1302/AMG1202-TSeries.

Note: You also need to configure the remote management settings to allow a WAN 

computer to manage the AMG1302/AMG1202-TSeries.

You may define additional rules and sets or modify existing ones but please exercise extreme 
caution in doing so.

For example, you may create rules to:

• Block certain types of traffic, such as IRC (Internet Relay Chat), from the LAN to the Internet.
• Allow certain types of traffic, such as Lotus Notes database synchronization, from specific hosts 

on the Internet to specific hosts on the LAN.

• Allow everyone except your competitors to access a web server.
• Restrict use of certain protocols, such as Telnet, to authorized users on the LAN.

These custom rules work by comparing the source IP address, destination IP address and IP 
protocol type of network traffic to rules set by the administrator. Your customized rules take 
precedence and override the AMG1302/AMG1202-TSeries’s default rules. 

15.6.2  Guidelines For Enhancing Security With Your Firewall

6

Change the default password via web configurator.

7

Think about access control before you connect to the network in any way.

8

Limit who can access your router.

9

Don't enable any local service (such as telnet or FTP) that you don't use. Any enabled service could 
present a potential security risk. A determined hacker might be able to find creative ways to misuse 
the enabled services to access the firewall or the network.

10

For local services that are enabled, protect against misuse. Protect by configuring the services to 
communicate only with specific peers, and protect by configuring rules to block packets for the 
services at specific interfaces.

Содержание AMG1202-T series

































































































































































































































































































































Отзывы:

Нет отзывов