ZyXEL Communications ALC1024, Руководство пользователя

Страница: 91 / 255

Commands with EEC
IEEE 802.1Q Tagged VLAN Commands 8-5
Figure 8-4 VLAN Status Command Example
These are the default VLAN settings. The default VLAN allows all ports to connect to each other and sets them to
send untagged packets.
8.6.4 PVID Command
Syntax:
192.168.1.1 vlan1q> pvid [<port #> <vlan id>]
where
<port #> = Bridge port number. Valid parameter range = [1 - 25].
<vlan id> = VLAN ID. Valid parameter range = [1 - 4094].
This command sets the VLAN ID to a specific port in the PVID table. To display the PVID table simply enter
this command without parameters, as shown next.
192.168.1.1 vlan1q> pvid
192.168.1.1 vlan1q> vlan status
IEEE 802.1Q VLAN : DISABLED
VLAN Egress Ports Untagged Ports
ID C E 12345678 12345678 12345678 C E 12345678 12345678 12345678
================================================================================
1 - v vvvvvvvv vvvvvvvv vvvvvvvv v v vvvvvvvv vvvvvvvv vvvvvvvv
Total 1 VLAN(s).
The default port VLAN id of all bridge ports:
Port 0 (CPU): 1
Port 1 (ethernet): 1
Port 2 (adsl1): 1
Port 3 (adsl2): 1
Port 4 (adsl3): 1
Port 5 (adsl4): 1
Port 6 (adsl5): 1
Port 7 (adsl6): 1
Port 8 (adsl7): 1
Port 9 (adsl8): 1
Port 10 (adsl9): 1
Port 11 (adsl10): 1
Port 12 (adsl11): 1
Port 13 (adsl12): 1
Port 14 (adsl13): 1
Port 15 (adsl14): 1
Port 16 (adsl15): 1
Port 17 (adsl16): 1
Port 18 (adsl17): 1
Port 19 (adsl18): 1
Port 20 (adsl19): 1
Port 21 (adsl20): 1
Port 22 (adsl21): 1
Port 23 (adsl22): 1
Port 24 (adsl23): 1
Port 25 (adsl24): 1
172.21.100.113 vlan1q>