ZyXEL Communications AG-320, Руководство пользователя, Страница: 58 / 114

ZyXEL AG-320 User’s Guide
58 Chapter 4 Wireless Station Mode Configuration
• If you select Infrastructure network type in the first screen, select WEP , WPA-PSK ,
WPA , WPA2-PSK , WPA2 or 802.1x from the drop-down list box to enable data
encryption. If you select Ad-Hoc network type in the first screen, you can only use WEP
encryption method. Otherwise, select Disabled to allow the AG-320 to communicate
with the access points or other peer wireless computers without any data encryption and
skip to step
5 .
Figure 35 Station Mode: Profile: Security Settings
• The screen varies depending on the encryption method you select in the previous screen.
The settings must be exactly the same on the APs or other peer wireless computers as
they are on the AG-320. Refer to
Section 4.3.1 on page 49 for detailed information on
wireless security configuration.
Figure 36 Station Mode: Profile: Security Settings
• This read-only screen shows a summary of the new profile settings. Verify that the
settings are correct. Click Save to save and go to the next screen. Click Back to return to
the previous screen. Otherwise, click Exit to go back to the Profile screen without
saving.