ZyXEL Communications AG-320, Руководство пользователя

Страница: 34 / 114

ZyXEL AG-320 User’s Guide
34 Chapter 2 Tutorial
7 Click Activate Now to use the new profile immediately. Otherwise, click the Activate
Later button to go back to the Profile List screen.
If you clicked Activate Later you can select the profile from the list in the Profile screen
and click Connect to activate it.
Note: Only one profile can be activated and used at any given time.
Figure 19 ZyXEL Utility: Profile Activate
8
When you activate the new profile, the ZyXEL utility goes to the Link Info screen while
it connects to the AP using your settings. When the wireless link is established, the
ZyXEL utility icon in the system tray turns green and the
Link Info screen displays
details of the active connection.
9
Make sure the selected AP in the active profile is connected to the Internet. Open your
Internet browser, enter
http://www.zyxel.com or the URL of any other web site in the
address bar and press ENTER. If you are able to access the web site, your new profile is
successfully configured.
10
If you cannot access the Internet, go back to the Profile screen. Select the profile you are
using and click Edit . Check the details you entered previously. Also, refer to the
Troubleshooting section of this User's Guide or contact your network administrator if
necessary.
2.3 Configuring the AG-320 as an AP
In access point mode, your AG-320 allows you to set up your wireless network without using
a dedicated AP. Refer to
Section 1.2.3 on page 26 and Chapter 5 on page 63 for more
information.
Note: With WZC, you cannot use the AG-320 as an access point.
After you install the ZyXEL utility and then insert the AG-320, follow the steps below to set
up your AG-320 as an AP.
1 Select AP Mode in any utility screen and wait for five seconds. The screen changes and
displays as next. Under Status , you can view the current settings on the AG-320. In the
Association List , you can see if any wireless clients have connected to your AG-320.