ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series Скачать руководство пользователя страница 85

Страница: 85 / 286

Prestige 660RU-Tx Series User’s Guide

Chapter 7 Network Address Translation (NAT) Screens

Table 20

Address Mapping Rule Edit

LABEL

DESCRIPTION

Type

Choose the port mapping type from one of the following.
•

One-to-One

: One-to-One mode maps one local IP address to one global IP

address. Note that port numbers do not change for One-to-one NAT mapping

type.

•

Many-to-One

: Many-to-One mode maps multiple local IP addresses to one

global IP address. This is equivalent to SUA (i.e., PAT, port address translation),

ZyXEL's Single User Account feature that previous ZyXEL routers supported

only.

•

Many-to-Many Overload

: Many-to-Many Overload mode maps multiple local IP

addresses to shared global IP addresses.

•

Many-to-Many No Overload

: Many-to-Many No Overload mode maps each

local IP address to unique global IP addresses.

•

Server

: This type allows you to specify inside servers of different services behind

the NAT to be accessible to the outside world.

Local Start IP

This is the starting local IP address (ILA). Local IP addresses are

N/A

for

Server

port

mapping.

Local End IP

This is the end local IP address (ILA). If your rule is for all local IP addresses, then

enter 0.0.0.0 as the

Local Start IP

address and 255.255.255.255 as the

Local End

address.

This field is

N/A

for

One-to-One

and

Server

mapping types.

Global Start IP

This is the starting global IP address (IGA). Enter 0.0.0.0 here if you have a dynamic

IP address from your ISP.

Global End IP

This is the ending global IP address (IGA). This field is

N/A

for

One-to-One

Many-

to-One

and

Server

mapping types.

Server Mapping

Set

Only available when

Type

is set to

Server

Select a number from the drop-down menu to choose a server set from the

NAT -

Address Mapping Rules

screen.

Edit Details

Click this link to go to the

NAT - Edit SUA/NAT Server Set

screen to edit a server set

that you have selected in the

Server Mapping Set

field.

Apply

Click

Apply

to save your changes back to the Prestige.

Cancel

Click

Cancel

to return to the previously saved settings.

Delete

Click

Delete

to exit this screen without saving.

Содержание ADSL2+ Ethernet/USB Gateway 660RU-Tx Series































































































































































































































































































Результаты поиска

Содержание ADSL2+ Ethernet/USB Gateway 660RU-Tx Series

Отзывы:

Бренды по названию

Популярные бренды

ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series, Руководство пользователя

Результаты поиска

Содержание ADSL2+ Ethernet/USB Gateway 660RU-Tx Series

Отзывы:

Бренды по названию

Популярные бренды