background image

Chapter 26 Maintenance

ZyWALL 2 Plus User’s Guide

448

Figure 279   

MAINTENANCE > General Setup

The following table describes the labels in this screen.  

26.3  Configuring Password 

Click 

MAINTENANCE

 > 

Password

 to open the following screen. Use this screen to change 

the ZyWALL’s management password.

Table 160   

MAINTENANCE > General Setup

LABEL

DESCRIPTION

General Setup

System Name

Choose a descriptive name for identification purposes. It is recommended you enter 

your computer’s “Computer name” in this field. This name can be up to 30 

alphanumeric characters long. Spaces are not allowed, but dashes “-” and 

underscores "_" are accepted.

Domain Name

The 

Domain Name

 entry is what is propagated to the DHCP clients on the LAN. If 

you leave this blank, the domain name obtained by DHCP from the ISP is used. 

While you must enter the host name (System Name), the domain name can be 

assigned from the ZyWALL via DHCP.
Enter the domain name (if you know it) here. If you leave this field blank, the ISP 

may assign a domain name via DHCP. 
The domain name entered by you is given priority over the ISP assigned domain 

name.

Administrator 

Inactivity Timer

Type how many minutes a management session (either via the web configurator or 

SMT) can be left idle before the session times out. The default is 5 minutes. After it 

times out you have to log in with your password again. Very long idle timeouts may 

have security risks. A value of "0" means a management session never times out, 

no matter how long it has been left idle (not recommended).

Apply

Click 

Apply

 to save your changes back to the ZyWALL.

Reset

Click 

Reset

 to begin configuring this screen afresh.

Содержание ADSL 2+ Security Gateway















































































































































































































































































































































































































































































































































































































































































































Отзывы: