ZyXEL Communications AAM1212, Руководство пользователя

Страница: 234 / 288

AAM1212 User’s Guide
Chapter 28 Switch Commands 233
1 Use the
switch vlan set
command to configure a VLAN ID (VID 3 in this example)
for managing the AAM (the “management” or “CPU” VLAN).
Figure 139 CPU VLAN Configuration and Activation Example
2 Use the
switch vlan cpu
command to set VID 3 as the management VLAN.
Figure 140 Deleting Default VLAN Example
28.8.12 VLAN Priority Command
Syntax:
switch vlan priority <portlist> <priority>
where
This command sets the priority of incoming frames with an IEEE 802.1Q VLAN tag.
The following example sets a priority of three for frames (with an IEEE 802.1Q VLAN tag)
that come in on ADSL port 2.
Figure 141 VLAN Priority Command Example
28.8.13 VLAN Delete Command
Syntax:
switch vlan delete <vlanlist>
ras> switch vlan set 3 enet1:FT
ras> switch vlan cpu set 3
<portlist>
= You can specify a single port: <1>, all ports: <*>, a list of ports:
<1,3,enet1>, you can also include a range of ports:
<1,5,6~10,enet1,enet2>.
<priority>
= This is the priority value (0 to 7) to use for incoming frames
with an IEEE 802.1Q VLAN tag.
ras> switch vlan priority 2 3