ZyXEL Communications AAM1212 Скачать руководство пользователя страница 117

Страница: 117 / 288

AAM1212 User’s Guide

116

Chapter 9 VLAN

9.6 VLAN Port Setting

Click

Advanced

and then

VLAN

in the navigation panel and then the

VLAN Port Setting

link to display the screen as shown next.

Use this screen to specify port VLAN IDs and to set whether or not Ethernet ports propagate
VLAN information to other switches.

Delete

Select the check boxes of the rules that you want to remove in the

Delete

column and

then click the

Delete

button.

You cannot delete a VLAN if any PVIDs are set to use the VLAN or the VLAN is the

CPU (management) VLAN. The

DEFAULT

VLAN cannot be deleted when a port’s

PVID refers to it. The CPU VLAN also cannot be deleted.

Cancel

Click

Cancel

to clear the

Delete

check boxes.

Active

Select this check box to enable the VLAN.
You cannot disable

a VLAN if any PVIDs are set to use the VLAN or the VLAN is the

CPU (management) VLAN.

Name

Enter a descriptive name for this VLAN group for identification purposes.

VLAN ID

Enter the VLAN ID for this static VLAN entry; the valid range is between 1 and 4094.

Port

The port numbers identify the AAM’s ports.

Control

Select

Normal

for the port to dynamically join this VLAN group using GVRP. This is

available for the Ethernet ports.
Select

Fixed

for the port to be a permanent member of this VLAN group. Use the

Select All

button to include every port.

Select

Forbidden

if you want to prohibit the port from joining this VLAN group. Use

the

Select All

button to include every port.

You cannot change a port from the fixed state to another state if the port’s PVID is set

to this VLAN. The VLAN must have at least one port set to the fixed status if the

VLAN is the CPU (management) VLAN.

Tagging

Select

Tx Tagging

if you want the port to tag all outgoing frames transmitted with this

VLAN group ID. Use the

All

button to include every port. Use the

None

button to

clear all of the ports’ check boxes.

Add

Click

Add

to save your settings. The VLAN then displays in the summary table at the

top of the screen.
Clicking

Add

saves your changes to the AAM’s volatile memory. The AAM loses

these changes if it is turned off or loses power, so use the

Config Save

link on the

navigation panel to save your changes to the non-volatile memory when you are

done configuring.

Cancel Click

Cancel

to begin configuring the screen again.

Table 27

Static VLAN Setting (continued)

LABEL

DESCRIPTION

Содержание AAM1212

































































































































































































































































































Результаты поиска

Содержание AAM1212

Отзывы:

Похожие инструкции для AAM1212

Бренды по названию

Популярные бренды

ZyXEL Communications AAM1212, Руководство пользователя

Результаты поиска

Содержание AAM1212

Отзывы:

Похожие инструкции для AAM1212

Бренды по названию

Популярные бренды