ZyXEL Communications AAM1212-51 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 435

ZyXEL Communications AAM1212-51 Скачать руководство пользователя страница 37

AAM1212-51/53 Series User’s Guide

Preface

37

Preface

Congratulations on your purchase of the AAM1212.

This preface introduces you to the AAM1212 and discusses the conventions of this User’s
Guide. It also provides information on other related documentation.

About This User's Guide

This manual is designed to guide you through the configuration of your AAM1212 for its
various applications.

Related Documentation

• ZyXEL Web Site

Please go to

http://www.zyxel.com

for product news, firmware, updated documents, and

other support materials.

Syntax Conventions

• “Enter” means for you to type one or more characters. “Select” or “Choose” means for

you to use one of the predefined choices.

• Command and arrow keys are enclosed in square brackets

.

[ENTER]

means the Enter, or

carriage return key;

[ESC]

means the Escape key and

[SPACE BAR]

means the Space Bar.

• Mouse action sequences are denoted using a comma. For example, “In Windows, click

Start

,

Programs

,

Acrobat Reader

” means first click the

Start

button, then move your

mouse pointer to

Programs

and then click

Acrobat Reader

.

• “e.g.,” is a shorthand for “for instance”, and “i.e.,” means “that is” or “in other words”.
• “AAM1212” refers to the AAM1212-51 for ADSL over POTS (Annex A) and the

AAM1212-53 for ADSL over ISDN (Annex B). Differentiation is made where needed.

• The AAM1212 may be referred to as the “AAM1212”, the “device” or the “system” in

this User’s Guide.

«
...
35
36
37
38
39
...
»

Содержание AAM1212-51




















































































































































































































































































































































































































































Отзывы:

Нет отзывов