ZyXEL Communications AAM1212-51, Руководство пользователя, Страница: 307 / 435

AAM1212-51/53 Series User’s Guide
Chapter 46 MAC Commands 307
46.3.2 MAC Count Enable Command
Syntax:
ras> switch mac count enable <portlist>
where
This command enables the MAC count filter on the specified DSL port(s). When the MAC
filter accept mode is enabled (see
Section 46.2 on page 303 ), the AAM1212 ignores the MAC
count setting and accepts all of the MAC addresses listed for the port in the MAC filter
settings.
The following example turns on the MAC count filter on DSL port 4.
46.3.3 MAC Count Disable Command
Syntax:
ras> switch mac count disable <portlist>
where
This command disables the MAC filtering feature on the specified DSL port(s).
The following example turns off the MAC count filter on DSL port 4.
<portlist> =
You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~10>.
Figure 170 MAC Count Enable Command Example
ras> switch mac count enable 4
<portlist> =
You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~10>.
Figure 171 MAC Count Disable Command Example
ras> switch mac count disable 4