manualshive.com logo in svg

ZyXEL Communications AAM1212-51, Руководство пользователя, Страница: 183 / 435

Поделиться
Скачать
ZyXEL Communications AAM1212-51 Скачать руководство пользователя страница 183

AAM1212-51/53 Series User’s Guide

Chapter 25 DHCP Relay

183

C

H A P T E R

25

DHCP Relay

This chapter shows you how to set up DHCP relays for each VLAN.

25.1  DHCP Relay

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual 
clients to obtain TCP/IP configuration at start-up from a DHCP server. You can configure the 
AAM1212 to relay DHCP requests to one or more DHCP servers and the server’s responses 
back to the clients. You can specify default DHCP servers for all VLAN, and you can specify 
DHCP servers for each VLAN.

25.2  DHCP Relay Agent Information Option (Option 82)

The AAM1212 can add information to DHCP requests that it relays to a DHCP server. This 
helps provide authentication about the source of the requests. You can also specify additional 
information for the AAM1212 to add to the DHCP requests that it relays to the DHCP server. 
Please see RFC 3046 for more details.

25.2.1  DHCP Relay Agent Circuit ID and Remote ID Sub-option 
Formats

The DHCP relay agent information feature adds an Agent Information field to the option 82 
field of the DHCP headers of DHCP request frames that the AAM1212 relays to a DHCP 
server. The Agent Information field that the AAM1212 adds contains an “Agent Circuit-ID 
sub-option” that includes the port number, VLAN ID and optional information about the port 
where the DHCP request was received.

The following figure shows the format of the Agent Circuit ID sub-option. The 1 in the first 
field identifies this as an Agent Circuit ID sub-option. The length N gives the total number of 
octets in the Agent Information Field. If the configuration request was received on a DSL port, 
a 2-byte Port No field specifies the ingress port number (the first byte is always 0, the second 
byte is in hexadecimal format). The next field is 2 bytes and displays the DHCP request 
packet’s VLAN ID. The last field (A) can range from 0 to 24 bytes and is optional information 
(that you specify) about this relay agent.

Figure 92   

DHCP Relay Agent Circuit ID Sub-option Format

Содержание AAM1212-51




















































































































































































































































































































































































































































Отзывы:

Нет отзывов