ZyXEL Communications AAM1212-51, Руководство пользователя, Страница: 151 / 435

AAM1212-51/53 Series User’s Guide
Chapter 17 IGMP 151
Figure 71 IGMP (Status)
The following table describes the labels in this screen.
Table 35 IGMP (Status)
LABEL DESCRIPTION
Bandwidth Setup Click Bandwidth Setup to open the IGMP Bandwidth screen where you can
set up bandwidth requirements for multicast channels (see Section 17.4 on page
152 ). You can also open the Bandwidth Port Setup screen to set up multicast
bandwidth requirements for selected ports (see Section 17.4.1 on page 153 ).
IGMP Setup Click IGMP Setup to open the IGMP Setup screen where you can configure
IGMP settings (see Section 17.5 on page 154 ).
Filter Setup Click Filter Setup to open the IGMP Filter Profile screen where you can
configure IGMP multicast filter profiles (see Section 17.6 on page 155 ).
Count Setup Click Count Setup to open the IGMP Count screen where you can limit the
number of IGMP groups a subscriber on a port can join (see Section 17.7 on
page 155 ).
IGMP Port Info Click IGMP Port Info to open the IGMP Port Info screen where you can look at
the current number of IGMP-related packets received on each port (see Section
17.8 on page 156 ).
IGMP Port Group Click IGMP Port Group to open the IGMP Port Group screen where you can
look at the current list of multicast groups each port has joined (see Section 17.9
on page 157 ).
Clear Click Clear to delete the information the AAM1212 has learned about multicast
groups. This resets every counter in this screen.
Query This is the total number of Query packets received.
Report This is the total number of Report packets received.
Leave This is the total number of Leave packets received.
Number of IGMP
Groups
This is how many IGMP groups the AAM1212 has identified on the local
network.
Previous
Next Click one of these buttons to show the previous/next screen if all of the
information cannot be seen in one screen.
Reload Click this button to refresh the screen.