ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series Скачать руководство пользователя

Страница: 229 / 496

P-662H/HW-D Series User’s Guide

Chapter 14 Content Access Control

229

14.4 User Online Status

To view the online status of each user, click

Security > Content Access Control

Online

Status

to display the screen as shown.

Figure 122

Content Access Control: Online Status

The following table describes the labels in this screen.

Table 85

Content Access Control: Online Status

LABEL

DESCRIPTION

Index

This field displays the index number.

Username

This field displays the username (up to 30 characters) for this user profile.

Group

This field displays the name of the associated user group.

Time Left

This field displays the amount of time that you have before the ZyXEL Device logs you out

and terminates your Internet access. This time depends on the time allowance configured

Time Scheduling

screen.

By using the

or –

buttons, the administrator can increase or decrease the time left in 15

minute increments without re-configuring the time allowances.

On-Line

This field displays

Yes

if a user is currently on-line.

This field displays

Ready

if a user is allowed to access the Internet at the moment and is

currently not on-line.
This field displays

if a user is not allowed to access the Internet at the moment and is

currently not on-line.

Back

Click

Back

to return to the previous screen.

Apply

Click

Apply

to save your changes back to the ZyXEL Device.

Cancel

Click

Cancel

to return to the previously saved settings.

Содержание 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series

















































































































































































































































































































































































































































































































Результаты поиска

Содержание 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series

Отзывы:

Похожие инструкции для 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series

Бренды по названию

Популярные бренды

ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series, Руководство пользователя

Результаты поиска

Содержание 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series

Отзывы:

Похожие инструкции для 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series

Бренды по названию

Популярные бренды