![ZyXEL Communications 100-NH Скачать руководство пользователя страница 69](http://html1.mh-extra.com/html/zyxel-communications/100-nh/100-nh_user-manual_945866069.webp)
Chapter 6 Wireless LAN
NWA1000 Series User’s Guide
69
Preamble Type
Select
Dynamic
to have the AP automatically use short preamble when wireless adapters
support it, otherwise the AP uses long preamble.
Select
Long
if you are unsure what preamble mode the wireless adapters support, and to
provide more reliable communications in busy wireless networks.
RTS/CTS
Threshold
(Request To Send) The threshold (number of bytes) for enabling RTS/CTS handshake.
Data with its frame size larger than this value will perform the RTS/CTS handshake.
Setting this attribute to be larger than the maximum MSDU (MAC service data unit) size
turns off the RTS/CTS handshake. Setting this attribute to its smallest value (1) turns on
the RTS/CTS handshake.
Extension
Channel
Protection Mode
You can use
CTS to self
or
RTS-CTS
protection mechanism to reduce conflicts with other
wireless networks or hidden wireless clients. The throughput of
RTS-CTS
is much lower
than
CTS to self
. Using this mode may decrease your wireless performance.
A-MPDU
Aggregation
This field is available only when
802.11n
,
802.11b/g/n
,
802.11a/n
or
802.11a/n/ac
is selected as the
Wireless Mode
.
Select to enable A-MPDU aggregation.
Message Protocol Data Unit (MPDU) aggregation collects Ethernet frames along with their
802.11n headers and wraps them in a 802.11n MAC header. This method is useful for
increasing bandwidth throughput in environments that are prone to high error rates.
Short GI
This field is available only when
802.11n
,
802.11b/g/n
,
802.11a/n
or
802.11a/n/ac
is selected as the
Wireless Mode
.
Select
Enabled
to use
Short GI
(Guard Interval). The guard interval is the gap
introduced between data transmission from users in order to reduce interference.
Reducing the GI increases data transfer rates but also increases interference. Increasing
the GI reduces data transfer rates but also reduces interference.
MCS Rate
The
MCS Rate
table is available only when
802.11n
,
802.11b/g/n
or
802.11a/n
or
802.11a/n/ac
is selected
in the
Wireless Mode
field.
IEEE 802.11n supports many different data rates which are called MCS rates. MCS stands
for Modulation and Coding Scheme. This is an 802.11n feature that increases the wireless
network performance in terms of throughput.
For each MCS Rate (0-15), select either
Enabled
to have the NWA use the data rate.
Clear the
Enabled
check box if you do not want the NWA to use the data rate.
Turn on the
Auto
option to have the NWA set the data rates automatically to optimize the
throughput.
Note: You can set the NWA to use up to four MCS rates at a time.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 14
Wireless LAN > Wireless Settings: MBSSID (continued)
LABEL
DESCRIPTION