Operating Instructions
16
V3.1r03
Layout
Adjustment to different keyboard layouts.
Setting the countries (DE, GB, SE, F, US, IT, …)
Settings (normal keyboard (QWERT)), ABC keyboard
Scanning
Only active when using the Scan module
Mode
Operation is to be made with:
One key – two key – joystick
The following can be selected as Scan mode:
Line mode: Selection by line, then within the line
Linear mode: Selection of each consecutive field
Block mode: Block selection, i.e. ¼ of the respective fields
Joystick: Automatic or manual starting
Scan time
Setting of scan times
Setting of number of runs until new start, if no key has been pressed.
Joystick: Setting of seconds until automatic acceptance of character displayed
LED
Setting of brightness of illuminated fields
Normal LED: General brightness (1 ...15)
Display LED: Brightness of shift and macro fields (1 ...15) actuated
STDvalue
The settings of delay times are set to standard values.
Wait 0 sec.
Block 0 sec.
General instructions
Stop: Setting is stopped without
storing
Ok, return: Confirmation of settings
To get to the setting mode, a standard PS/2
keyboard can be used.
Start repeat function after 1 sec.
Repeat frequency 0.5 sec.
