ZUUM Media LSPTZ-2MP-IP-2.7-11MM-IR30, Руководство по установке

Страница: 3 / 22

ZM111317 ii
7 APPENDIX Ⅲ 12V DC WIRE GAUGE AND TRANSMISSION DISTANCE
RELATIONSHIP SHEET
........................................................................................... 15
8 APPENDIX Ⅳ WIRE GAUGE REFERENCE SHEET
........................................ 16
Welcome
Thank you for purchasing our Network speed dome camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual for future reference!
Important Safeguards and Warnings
1
．
Electrical safety
All installation and operation here should conform to your local electrical safety codes.
Please check if the power supply is correct before operating the device.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the
Limited power source is rated 12V DC, DC5V or AC24V in the IEC60950-1. (Power supply
requirement is subject to the device label).
Please prevent the line cord from being damaged, especially the plug, power socket and the
junction from the device.
Note: Do not connect PoE and standard 12V power supply sources to the device at the
same time; it may result in device damage!
We assume no liability or responsibility for fires or electrical shock caused by improper handling
or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2
．
Environment
Please do not aim the device at strong light (such as lightning, sunlight etc.) to focus; otherwise it
may cause overexposure (It is not the devices malfunction), which will affect the longevity of
CCD or CMOS.
Please transport, use and store the device within the range of allowed humidity and temperature.
Please don’t keep the device in a place which is wet, dusty, extremely hot, and extremely cold
and with strong electromagnetic radiation or unstable lighting.
Please do not allow water and other liquid to fall into the camera to prevent internal components
to be damaged.
Please keep the camera well ventilated to prevent heat accumulation.
Please pack the device with standard factory packaging or material with same quality when
transporting the device.