1 x 1 Mic/Line Preamp.
Chassis: Aluminium, Black
1, Balanced Mic or Line Selectable
Impedance 1.2KΩ Balanced,
600Ω Unbalanced
Phantom 48VDC
Low Cut Filter 75Hz/12dB
Line Input Level 1V (0dBV) Balanced =
= 2V (+6dBV) Balanced Output,
Maximum Input 8V (+15dBV)
Mic Input Level 6-60dB Gain
Maximum Input 40mV (-27dBV)
1, Balanced Line
Impedance 300Ω Balanced,
150Ω Unbalanced
Line Output Level 1V (0dBV)In =2V (+6dBV)
Maximum Output 6V (15dBV)
Input Gain Control
Output Level Control
Output Limiter Threshold Adjust
Input Signal Green, 25mV On Threshold
Input Peak Red, -3dB Before Clip
Limiter Yellow, Output Limiter Activation
Frequency Response 20Hz - 20kHz (±1dB)
THD 0.06% & 1kHz
Signal to Noise 105dBV
Current required from +16V and -16V
Power Consumption 120mA Max
Dimensions: 1U in 500 series rack
Weight: 376 gr 13,3 oz
Description
Inputs
Outputs
Controls
Indicators
Electrical
Power
Congratulations and thank you for purchasing the z501.
This module was designed to inspire you and elevate the quality of your recordings
and to make it possible to reach your sonic goals faster and with ease. We
really went out of our way to bring you this refined quality and extremely clean
Swedish design using only the highest quality components and we also did
rigorous testing protocols on every unit to make sure it will perform perfectly in
every situation, in the studio, on the road or in a mobile recording environment.
Special attention was paid to ergonomics and also the visual language to
make sure that there will always be effective readability and visual feedback
supporting you in the
most focus demanding and dynamic situations, to find
the right control fast makes you work better and saves time. We are confident
to say that our product is top tier. As any other of our devices , this one
requires very little care and just a little bit of attention to our recommendations
regarding maintenance. Please spend a couple of minutes to read this manual
so you can get the most out of the product. Remember and implement these
few recommendations for handling the product and you’ll be able to enjoy it for
many years to come.
We hope you will enjoy this product just as much as we enjoyed
designing and making it
-25
+10
-20
-15
-10
-5
+0
+5
20
20k
50
100
200
500
1k
2k
5k
10k
typical frequency response
-25
+10
-20
-15
-10
-5
+0
+5
20
20k
50
100
200
500
1k
2k
5k
10k
typical frequency response with low cut
-25
+10
-20
-15
-10
-5
+0
+5
20
20k
50
100
200
500
1k
2k
5k
10k
typical freq. response using standard “57” mic
SAFETY INFORMATION
- Pollution Degree 2
- Maximum Relative Humidity: <80%
- Operation temperature range: 10 °C to 35 °C
- Ordinary Protection: This equipment should
not be exposed to dripping or splashing.
- Avoid placing objects filled with liquids,
such as vases or glasses, on this equipment.
- Storage and transportation temperature
range –25 °C to 45 °C
- Equipment suitable for continuous operation
This product complies with the
(2012/19/EU) WEEE Directive. The affixed
product label indicates that
you
must not
discard
this
electrical/electronic
product
in domestic household waste
.
No user serviceable parts inside
Refer
all servicing to qualified service personnel.
By affixing the CE marking to a product,
a manufacturer declares that the product
meets all the legal requirementsfor CE
marking and can be sold throughout the EEA.
Keep away from rain or moisture.
No dripping or splashing.
No objects filled with liquids
should be placed on or near the product.
