ZURN PlumbSmart AquaSense Z6913-XL Series, Инструкция по установке, эксплуатации, обслуживанию и каталог запасных частей

Страница: 14 / 28

FV806 Rev. A 09/07/21
Page 14
7. Tighten electronics module assembly with the hydrogenerator
to shank and connect water line(s).
10. Connect sensor cable from spout to monitor.
• Do not use any abrasive or chemical cleaners to clean the faucets. Do not use any cleaners with an acid base.
• If abrasives or chemicals are used it can lead to dulling of luster, attacking of chrome plating or decorative finishes.
• ONLY use mildly warm soapy water, and then wipe the device dry with a clean/soft towel or cloth.
• Upon cleaning other areas of the restroom be sure the sensor lenses are protected from other cleaning chemicals/solvents to prevent
potential damages to the sensor and/or electronics.
Care and Cleaning Instructions (All Configurations)
8. Ensure that sink is clear of tools/debris and is in normal
operating condition. Remove protective film from sensor lens if one
is present.
9. Turn on water supply(ies).